DJI Matrice 210 V2 is a Matrice 200 Series V2 enterprise aircraft. DJI lists 4.80 kg with two TB55 batteries, a 6.14 kg maximum takeoff weight and 1.34 kg maximum payload. Its 34-minute no-payload and 24-minute 6.14 kg takeoff-weight flight figures are separate conditions. Single downward, single upward or dual downward gimbals. OcuSync 2.0 uses a V2-generation controller; the first-generation M200 controller is incompatible.
Browse the complete DJI model database
Core specifications
| Weight | 4.80 kg with two TB55 batteries; 6.14 kg MTOW |
|---|---|
| Flight time | 34 min no payload; 24 min at 6.14 kg takeoff weight, both with two TB55 batteries |
| Range | 8 km FCC / 5 km CE/MIC/SRRC, unobstructed and interference-free |
| Maximum speed | 81 km/h S/A with single downward gimbal; 73.8 km/h S/A with upward or dual-downward gimbals |
| Video | Payload-dependent |
| Camera / sensor | Interchangeable Zenmuse payload |
| Transmission | DJI OcuSync 2.0 / GL900A |
Technical specifications
| Configured Weight | 4.80 kg with two TB55 batteries; 6.14 kg MTOW |
|---|---|
| Max Takeoff Weight | 6.14 kg |
| Max Payload (Two TB55) | 1.34 kg |
| Max Flight Time (No Payload) | 34 min with two TB55 batteries |
| Max Flight Time (At 6.14 kg) | 24 min with two TB55 batteries |
| Max Speed | 81 km/h S/A with single downward gimbal; 73.8 km/h S/A with upward or dual-downward gimbals |
| Ingress Protection | IP43 |
| Gimbal Installation | Single downward, single upward or dual downward gimbals |
| Transmission | OcuSync 2.0, 8 km FCC / 5 km CE/MIC/SRRC, unobstructed and interference-free |
| Remote Controller | GL900A / Cendence S; first-generation M200 remote controller is incompatible |
| TB55 Battery (Each) | 7,660 mAh, 22.8 V, 174.6 Wh; aircraft uses two |
| GNSS | GPS + GLONASS |
| Max Wind Resistance | 12 m/s |
| Operating Temperature | -20° to 50° C |
| Supported Gimbals | DJI lists Zenmuse X4S, X5S, X7, XT, XT2 and Z30; mounting-position limits still apply |
| Second Downward Gimbal | Connector II supports Zenmuse XT or Z30 only; connector I has the broader DJI list |
| Upward + Downward Control | Both may be installed but DJI says they cannot be controlled simultaneously |
| Official Source | https://www.dji.com/support/product/matrice-200-series-v2 |
Frequently asked questions
What are the headline DJI Matrice 210 V2 specifications?
DJI Matrice 210 V2 is a Matrice 200 Series V2 enterprise aircraft. DJI lists 4.80 kg with two TB55 batteries, a 6.14 kg maximum takeoff weight and 1.34 kg maximum payload. Its 34-minute no-payload and 24-minute 6.14 kg takeoff-weight flight figures are separate conditions. Single downward, single upward or dual downward gimbals. OcuSync 2.0 uses a V2-generation controller; the first-generation M200 controller is incompatible.
Under what conditions are DJI Matrice 210 V2 flight-time figures measured?
DJI lists 34 min with no payload and 24 min at the 6.14 kg maximum takeoff weight, both with two TB55 batteries. The longest no-payload figure is not a full-payload guarantee.
What is the DJI Matrice 210 V2 transmission or control range?
DJI lists 8 km FCC and 5 km CE/MIC/SRRC for OcuSync 2.0 in unobstructed, interference-free tests. It is not permission to fly that far; local flight and line-of-sight rules still apply.
Does this Wiki page prove current stock, parts, or repair support?
No. This is an official-source model reference. Confirm any current Reboot Hub product, part, compatibility, or service path from the exact live listing or a written support response.
Which gimbal configurations does DJI Matrice 210 V2 support?
Single downward, single upward or dual downward gimbals. Match the exact gimbal mount, camera and firmware before use.
Can a first-generation Matrice 200 controller operate the V2 aircraft?
No. DJI explicitly says the original Matrice 200 Series remote controller is incompatible with Matrice 200 Series V2.
Can any DJI gimbal use the second downward mount on DJI Matrice 210 V2?
No. DJI lists Zenmuse XT or Z30 only for downward connector II. Connector I supports the wider DJI gimbal list; an upward and downward pair cannot be controlled simultaneously.
Official DJI sources
- https://www.dji.com/ca/matrice-200-series-v2
- https://www.dji.com/products/compare-m200-series
- https://www.dji.com/downloads/products/matrice-200-series-v2
This is an official-source technical reference. It does not claim current Reboot Hub stock, parts availability, compatibility, repair capability, certification, or regional operating approval. Verify the exact live listing or request written confirmation before purchase or service.