Drone Wiki
FI FI21 kieltä
Drone Wikin kieli21
Remote Controller profile

DJI GL300A Remote Controller

DJI’s Phantom 3 Series remote-controller release notes explicitly name GL300A and say that firmware applies to Phantom 3 Advanced and Professional. DJI’s Advanced manual lists a 6000 mAh 2S phone-linked controller with USB output and up to 5 km FCC or 3.5 km CE unobstructed radio tests. The manual’s family specification and the GL300A firmware note are separate sources; they do not prove every P3 Advanced/Professional unit uses GL300A or that other GL300 revisions are interchangeable.

Remote ControllerPhantom 3 Advanced / ProfessionalOfficial specsInspection
Explore Controllers Wiki
GL300ADJI MODEL
5/3.5 kmFCC/CE TEST
6000 mAhFAMILY BATTERY
DJISOURCE

Quick Answer

The GL300A model is named in DJI firmware notes for Phantom 3 Advanced/Professional. Confirm the physical code, DJI GO firmware and exact aircraft before pairing.

Specifications

Model identificationGL300A explicitly named in DJI Phantom 3 Series RC release notes
Official firmware scopePhantom 3 Advanced and Phantom 3 Professional; not proof all units use this revision
Family video downlinkDJI Lightbridge 2.4 GHz in the Phantom 3 Advanced manual
Family radio testUp to 5 km FCC / 3.5 km CE, unobstructed and free of interference
Family video outputUSB to mobile device
Family controller battery6000 mAh LiPo 2S; do not confuse with aircraft flight battery
Family operating temperature0 to 40 °C
GL300 revision boundaryCheck the actual controller label and firmware; do not assume GL300A/B/C substitution
DJI GL300A release notehttps://dl.djicdn.com/downloads/phantom_3/Phantom%2B3%2BSeries%2BRemote%2BController%2BRelease%2BNotes.pdf
DJI Advanced family manualhttps://dl.djicdn.com/downloads/phantom_3/20170706/Phantom%2B3%2BAdvanced%2BUser%2BManual%2Bv1.8.pdf

Compatibility Notes

The GL300A model is named in DJI firmware notes for Phantom 3 Advanced/Professional. Confirm the physical code, DJI GO firmware and exact aircraft before pairing.

DJI Phantom 3 AdvancedDJI Phantom 3 Professional

Inspection Checklist

Model identity

Read the exact printed controller model code and match the aircraft generation before pairing.

Controls and ports

Check stick centering, mode switch, gimbal dial, physical output ports and mobile/display path.

Battery and radio

Check charging, antenna integrity and a safe short-range link with compatible current firmware.

Common Failure Modes

Wrong controller generation

Similar housing does not prove compatibility; compare the model code and DJI transmission generation.

Control or display fault

Damaged sticks, output ports, display, antenna, battery or stale firmware can interrupt the link.

Repair Notes

  • Confirm exact aircraft/controller labels and firmware before diagnosis.
  • Retest stick calibration, output path and a controlled short-range link after any repair.

Pre-Owned Buying Checks

  • Verify the printed model code and correct aircraft generation.
  • Inspect sticks, outputs, display/phone mount, antennas, battery and charging.
  • Confirm pairing and no current stock claim from the Wiki profile alone.

Virallinen sivusto: reboot-hub.com

Virallinen verkkotunnuksemme on reboot-hub.com. Tämä on ainoa nykyinen virallinen sivustomme droonien korjaukseen, käytettyihin DJI-drooneihin ja OEM-osiin.

Reboot Hub on riippumaton korjausosien ja huoltopalvelujen tarjoaja. Reboot Hub ei ole sidoksissa DJI:hin eikä DJI ole antanut sille hyväksyntäänsä.