Drone Wiki
DE DE21 Sprachen
Sprache der Drone Wiki21
Remote Controller profile

DJI RC Plus

Rugged enterprise screen controller for Matrice 30, Matrice 300/350, and supported enterprise payload workflows.

Remote ControllerCompatibilityOfficial specsInspection
Remote ControllerPROFILE TYPE
4MAPPED MODELS
DJIECOSYSTEM
OFFICIAL ONLYSOURCE STATUS

Quick Answer

DJI RC Plus is an accessory, not an aircraft model. Select it by exact compatibility first, then verify condition, firmware, pairing, ports, controls or displays, battery behavior, and included items.

Specifications

Screen7.02-inch, 1920×1200, 1,200 nits
WeightApprox. 1.25 kg without WB37
Ingress ProtectionIP54
Operating TimeApprox. 3.3 hours internal; 6 hours with WB37
TransmissionO3 Enterprise up to 20 km FCC / 8 km CE
Operating Temperature-20° to 50°C
Official sourceshttps://enterprise.dji.com/matrice-350-rtk/specs · https://enterprise.dji.com/matrice-30/specs

Compatibility Notes

Compatibility depends on the exact aircraft or air unit, controller path, transmission generation, firmware, region, and DJI current support. Verify the complete pairing before purchase or flight.

Inspection Checklist

Pairing and firmware

Confirm the exact aircraft, transmission generation, controller firmware, app, and account or binding state before relying on compatibility.

Controls and calibration

Check stick centering, dead zones, wheels, dials, shoulder buttons, pause/RTH, record/shutter, and calibration behavior.

Ports, antennas, power, and display

Inspect charging and data ports, antennas, battery behavior, screen/touch response where fitted, speaker, fans, and external battery contacts.

Common Failure Modes

Stick or calibration fault

Off-center sticks, dead zones, or failed calibration can create unsafe commands.

Binding, port, RF, or power fault

A controller may power on yet fail because of unsupported firmware, account state, port damage, antenna/RF faults, or a degraded battery.

Repair Notes

  • Verify the official compatibility path before hardware diagnosis.
  • Record the exact firmware, aircraft, controller, and region combination.
  • After repair, calibrate controls or optics as applicable and perform a controlled low-risk functional test.

Pre-Owned Buying Checks

  • Confirm exact model and included items.
  • Inspect controls, displays, lenses, antennas, ports, battery, charging, and housing.
  • Avoid units with uncertain binding, firmware, water exposure, impact damage, or incomplete compatibility evidence.