Drone Wiki
SV SV21 språk
Språk i Drone Wiki21
Remote Controller profile

DJI GL300K Remote Controller

DJI GL300K is the built-in-screen controller specified for Phantom 4 Pro+ V2.0. DJI lists a 5.5-inch 1080p 1000-nit Android display, HDMI output, 6000 mAh internal battery and 10 km FCC or 6 km CE/SRRC/MIC unobstructed radio tests. DJI says the Pro V2.0 remote controller is not interchangeable with the original Phantom 4 Pro controller because their transmission systems differ.

Remote ControllerPhantom 4 Pro+ V2.0Official specsInspection
5.5 inBUILT-IN DISPLAY
10/6 kmFCC/CE RADIO TEST
6000 mAhCONTROLLER BATTERY
DJISOURCE

Quick Answer

Check the GL300K label and Phantom 4 Pro+ V2.0 aircraft. The integrated display distinguishes it from GL300L; neither should be sold as an original Phantom 4 Pro controller.

Specifications

ModelGL300K
Confirmed aircraftPhantom 4 Pro+ V2.0 (integrated-screen controller version)
Built-in display5.5-inch 1920×1080, 1000 cd/m²; Android, 4 GB RAM + 16 GB ROM
Video outputHDMI; unlike GL300L phone/tablet controller
Controller battery6000 mAh LiPo 2S internal battery
Frequencies2.400–2.483 GHz and 5.725–5.850 GHz; regional limits apply
DJI range test10 km FCC; 6 km CE/SRRC/MIC, unobstructed and free of interference
Operating temperature0 to 40 °C
Cross-generation restrictionNot interchangeable with original Phantom 4 Pro controller; transmission technology differs
Official sourcehttps://www.dji.com/support/product/phantom-4-pro-v2

Compatibility Notes

Check the GL300K label and Phantom 4 Pro+ V2.0 aircraft. The integrated display distinguishes it from GL300L; neither should be sold as an original Phantom 4 Pro controller.

Inspection Checklist

Model identity

Read the exact printed controller model code and match the aircraft generation before pairing.

Controls and ports

Check stick centering, mode switch, gimbal dial, physical output ports and mobile/display path.

Battery and radio

Check charging, antenna integrity and a safe short-range link with compatible current firmware.

Common Failure Modes

Wrong controller generation

Similar housing does not prove compatibility; compare the model code and DJI transmission generation.

Control or display fault

Damaged sticks, output ports, display, antenna, battery or stale firmware can interrupt the link.

Repair Notes

  • Confirm exact aircraft/controller labels and firmware before diagnosis.
  • Retest stick calibration, output path and a controlled short-range link after any repair.

Pre-Owned Buying Checks

  • Verify the printed model code and correct aircraft generation.
  • Inspect sticks, outputs, display/phone mount, antennas, battery and charging.
  • Confirm pairing and no current stock claim from the Wiki profile alone.