Drone Wiki
PT-PT PT-PT21 idiomas
Idioma da Drone Wiki21
Remote Controller profile

DJI RC-N1C Remote Controller

DJI RC-N1C is a phone-connected OcuSync 2.0 controller listed by DJI for Mini 4K. DJI’s Mini 2 SE/Mini 4K accessory table does not list RC-N1C for Mini 2 SE, Mini 2, or Mini SE; confirm the exact aircraft, firmware, app, and controller label before pairing.

Remote ControllerMini 4KOfficial specsInspection
Phone-linkedCONTROLLER TYPE
Mini 4KCONFIRMED AIRCRAFT
4 hRUNTIME WITHOUT PHONE CHARGING
DJISOURCE

Quick Answer

RC-N1C is a separate DJI controller variant with confirmed Mini 4K support. It is not interchangeable with RC-N1 across every Mini model; check the exact label and DJI compatibility table.

Specifications

ModelDJI RC-N1C Remote Controller
Confirmed aircraftDJI Mini 4K; DJI’s Mini 2 SE/Mini 4K comparison excludes RC-N1C for Mini 2 SE, Mini 2, and Mini SE
Maximum operating time4 hours without charging a phone; 2 hours while charging a phone, under DJI test conditions
Maximum phone size180 × 86 × 10 mm
Operating temperature-10° to 40°C
ChargingUSB-C at the bottom; battery LEDs indicate charging
ControlsRemovable sticks, flight-mode switch, flight pause/RTH, gimbal dial and DJI Fly phone link
Official sourceshttps://repair.dji.com/help/content?customId=01700007462&lang=en&paperDocType=ARTICLE&re=US&spaceId=17 · https://www.dji.com/mini-2-se/specs · https://repair.dji.com/help/content?customId=01700006567&lang=en&paperDocType=ARTICLE&re=US&spaceId=17

Compatibility Notes

DJI explicitly lists RC-N1C for Mini 4K and excludes it for Mini 2 SE, Mini 2, and Mini SE in its accessory table. Do not infer compatibility from the similar RC-N1 housing or shared sticks/cables.

Inspection Checklist

Identity and pairing

Read the RC-N1C label, then verify the Mini 4K firmware and DJI Fly connection before purchase.

Controls and ports

Check stick centering, mode switch, RTH button, gimbal dial, USB-C connector and phone cable.

Battery and RF

Confirm charging LEDs, runtime, antenna integrity and a stable short-range link in a controlled test.

Common Failure Modes

Wrong model pairing

RC-N1C must not be sold as a universal RC-N1 substitute; DJI’s support matrix excludes several Mini aircraft.

Connection or control fault

A damaged phone cable, USB-C port, sticks, antenna or stale firmware can prevent reliable control.

Repair Notes

  • Confirm the official aircraft/controller pairing before diagnosis.
  • Record controller identity and firmware.
  • Retest charging, control calibration and short-range link after any repair.

Pre-Owned Buying Checks

  • Verify the RC-N1C model marking.
  • Check the exact Mini 4K aircraft and DJI Fly pairing.
  • Inspect cables, sticks, ports, antennas and battery behavior.