Drone Wiki
IT IT21 lingue
Lingua di Drone Wiki21
Remote Controller profile

DJI GL658A Remote Controller

DJI lists GL658A as the remote-controller model on its Inspire 1 V1.0 support specification. It has a 6000 mAh 2S LiPo internal battery, USB and mini-HDMI output, host/slave control and phone/tablet support up to 170 mm wide. DJI rates the paired link at up to 5 km FCC, 3.5 km CE or 2 km MIC in unobstructed, interference-free tests. Similar Inspire 1-series controllers may carry other labels; verify the exact hardware and firmware.

Remote ControllerInspire 1 V1.0Official specsInspection
GL658ADJI MODEL
5/3.5 kmFCC/CE RADIO TEST
6000 mAhCONTROLLER BATTERY
DJISOURCE

Quick Answer

GL658A is expressly named for Inspire 1 V1.0 in DJI support specifications. Do not assume every Inspire 1 Pro, RAW or V2 controller is this exact hardware revision.

Specifications

ModelGL658A
Confirmed aircraftInspire 1 V1.0 DJI support specification; verify other Inspire 1 variants separately
Dual-user operationHost-and-slave controller connection
Video outputUSB and mini-HDMI
Controller battery6000 mAh 2S LiPo internal battery; not the aircraft TB47/TB48
Mobile-device holderTablet or smartphone up to 170 mm wide
Frequencies2.400–2.483 GHz; 5.725–5.825 GHz; 922.7–927.7 MHz Japan only
DJI range testUp to 5 km FCC, 3.5 km CE, 2 km MIC, unobstructed and free of interference
Operating temperature-10 to 40 °C
Exact-revision caveatMatch the GL658A label, aircraft generation, app and firmware before pairing
Official sourcehttps://www.dji.com/support/product/inspire-1

Compatibility Notes

GL658A is expressly named for Inspire 1 V1.0 in DJI support specifications. Do not assume every Inspire 1 Pro, RAW or V2 controller is this exact hardware revision.

Inspection Checklist

Model identity

Read the exact printed controller model code and match the aircraft generation before pairing.

Controls and ports

Check stick centering, mode switch, gimbal dial, physical output ports and mobile/display path.

Battery and radio

Check charging, antenna integrity and a safe short-range link with compatible current firmware.

Common Failure Modes

Wrong controller generation

Similar housing does not prove compatibility; compare the model code and DJI transmission generation.

Control or display fault

Damaged sticks, output ports, display, antenna, battery or stale firmware can interrupt the link.

Repair Notes

  • Confirm exact aircraft/controller labels and firmware before diagnosis.
  • Retest stick calibration, output path and a controlled short-range link after any repair.

Pre-Owned Buying Checks

  • Verify the printed model code and correct aircraft generation.
  • Inspect sticks, outputs, display/phone mount, antennas, battery and charging.
  • Confirm pairing and no current stock claim from the Wiki profile alone.