Drone Wiki
FR FR21 langues
Langue de Drone Wiki21
Remote Controller profile

DJI GL358wB Remote Controller

DJI’s Phantom 3 4K manual identifies GL358wB as a remote-controller model and separately names GL390wB as the Japan version. It lists 5.725–5.825 GHz for the standard remote, a 2,600 mAh 2S battery and outdoor unobstructed tests of 1,200 m FCC or 500 m CE at 120 m aircraft altitude. The controller is a Phantom 3 4K reference; the manual does not establish Phantom 3 SE pairing.

Remote ControllerPhantom 3 4KOfficial specsInspection
GL358wBDJI MODEL
1,200/500 mFCC/CE TEST
2,600 mAhCONTROLLER BATTERY
DJISOURCE

Quick Answer

Confirm the GL358wB marking and Phantom 3 4K aircraft before pairing. GL390wB is explicitly the Japan variant; GL358wD is documented separately for Phantom 3 SE.

Specifications

ModelGL358wB; DJI manual lists GL390wB separately as Japan version
Documented aircraftPhantom 3 4K; no Phantom 3 SE pairing claim
Remote-controller frequency5.725–5.825 GHz; Japan model has a separate band
DJI range test1,200 m FCC / 500 m CE, outdoors unobstructed at 120 m aircraft altitude
Controller battery2,600 mAh LiPo 18650 2S; not the aircraft flight battery
Operating temperature0 to 40 °C
Mobile device holderSmartphone or tablet
Family video setupDJI GO mobile device joins the aircraft Wi-Fi video network
Regional boundaryManual FCC/CE test figures do not establish a Japan-specific GL390wB range
Official DJI sourcehttps://dl.djicdn.com/downloads/phantom_3_4k/20170711/Phantom_3_4K_User_Manual_EN.pdf

Compatibility Notes

Confirm the GL358wB marking and Phantom 3 4K aircraft before pairing. GL390wB is explicitly the Japan variant; GL358wD is documented separately for Phantom 3 SE.

Inspection Checklist

Model identity

Read the exact printed controller model code and match the aircraft generation before pairing.

Controls and ports

Check stick centering, mode switch, gimbal dial, physical output ports and mobile/display path.

Battery and radio

Check charging, antenna integrity and a safe short-range link with compatible current firmware.

Common Failure Modes

Wrong controller generation

Similar housing does not prove compatibility; compare the model code and DJI transmission generation.

Control or display fault

Damaged sticks, output ports, display, antenna, battery or stale firmware can interrupt the link.

Repair Notes

  • Confirm exact aircraft/controller labels and firmware before diagnosis.
  • Retest stick calibration, output path and a controlled short-range link after any repair.

Pre-Owned Buying Checks

  • Verify the printed model code and correct aircraft generation.
  • Inspect sticks, outputs, display/phone mount, antennas, battery and charging.
  • Confirm pairing and no current stock claim from the Wiki profile alone.