Drone Wiki
DA DA21 sprog
Drone Wiki-sprog21
Remote Controller profile

DJI GL300F Remote Controller

DJI’s Phantom 4 Pro / Pro+ series manual identifies GL300F as the original phone/tablet Phantom 4 Pro controller. It uses USB output and a 6000 mAh 2S battery. The manual lists 7 km FCC, but 2.4 GHz CE is 3.5 km whereas 5.8 GHz CE is 2 km, all unobstructed and interference-free. GL300F is not the OcuSync V2.0 GL300L controller.

Remote ControllerOriginal Phantom 4 ProOfficial specsInspection
GL300FDJI MODEL
USBVIDEO OUTPUT
6000 mAhCONTROLLER BATTERY
DJISOURCE

Quick Answer

Match the GL300F label to the original Phantom 4 Pro; do not treat it as an OcuSync Phantom 4 Pro V2.0 remote.

Specifications

ModelGL300F
Confirmed aircraft generationOriginal Phantom 4 Pro; not V2.0 GL300L
Display pathSeparate tablet or smartphone; no GL300E built-in display
Video outputUSB
2.4 GHz radio test7 km FCC, 3.5 km CE, 4 km SRRC; unobstructed and interference-free
5.8 GHz radio test7 km FCC, 2 km CE, 5 km SRRC; unobstructed and interference-free
Controller battery6000 mAh LiPo 2S internal battery
Operating temperature0 to 40 °C
Generation boundaryOriginal Pro and Pro V2.0 use different image-transmission technologies
Official sourcehttps://dl.djicdn.com/downloads/phantom_4_pro/20211129/UM/Phantom_4_Pro_Pro_Plus_Series_User_Manual_EN.pdf
USB port clarification sourcehttps://dl.djicdn.com/downloads/phantom_4_pro/20171017/Phantom_4_Pro_Pro_Plus_User_Manual-EN.pdf

Compatibility Notes

Match the GL300F label to the original Phantom 4 Pro; do not treat it as an OcuSync Phantom 4 Pro V2.0 remote.

Inspection Checklist

Model identity

Read the exact printed controller model code and match the aircraft generation before pairing.

Controls and ports

Check stick centering, mode switch, gimbal dial, physical output ports and mobile/display path.

Battery and radio

Check charging, antenna integrity and a safe short-range link with compatible current firmware.

Common Failure Modes

Wrong controller generation

Similar housing does not prove compatibility; compare the model code and DJI transmission generation.

Control or display fault

Damaged sticks, output ports, display, antenna, battery or stale firmware can interrupt the link.

Repair Notes

  • Confirm exact aircraft/controller labels and firmware before diagnosis.
  • Retest stick calibration, output path and a controlled short-range link after any repair.

Pre-Owned Buying Checks

  • Verify the printed model code and correct aircraft generation.
  • Inspect sticks, outputs, display/phone mount, antennas, battery and charging.
  • Confirm pairing and no current stock claim from the Wiki profile alone.