{"title":"DJI Air 2S Parts","description":"\u003cdiv class=\"rh-collection-intro\"\u003e\n\u003cp\u003eShop OEM-pulled DJI Air 2S repair parts organized by exact component, including motherboard and ESC electronics, GPS and IMU modules, front, upper, rear and downward vision systems, gimbal assemblies, camera optics, flexible flat cables, cooling hardware, arm modules, hinges, landing gear and airframe covers. Each product page identifies one physical part and one SKU so left and right components remain separate.\u003c\/p\u003e\n\u003cp\u003eCompare every listing image with the removed Air 2S component before purchase. Confirm the side, axis, connector layout, mounting points, included motor or cable and hardware revision; Mavic Air 2, Air 3 and Air 3S parts can look similar but are not treated as interchangeable without explicit listing evidence.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"genuine-oem-pulled-dji-mavic-air-2s-aircraft-upper-cover-module","title":"DJI Air 2S Aircraft Upper Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis aircraft upper cover forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Aircraft Upper Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eAircraft Upper Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558861820081,"sku":"part-Air-00131","price":37.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-dji-mavic-air-2s-aircraft-upper-cover-module-01.webp?v=1788507312"},{"product_id":"genuine-oem-pulled-dji-air-2s-gps-imu-board","title":"DJI Air 2S GPS and IMU Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis GPS and IMU module supports aircraft positioning and motion sensing in the DJI Air 2S through the integrated module and connector shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare module outline, shielding, printed identifiers, connector orientation, mounting points and any attached damping or cable pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One GPS and IMU Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGPS and IMU Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare module outline, shielding, printed identifiers, connector orientation, mounting points and any attached damping or cable pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558862278833,"sku":"part-Air-00136","price":52.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-dji-air-2s-gps-imu-board-01.webp?v=1788507404"},{"product_id":"genuine-oem-pulled-mavic-air-2s-rear-arm-module-right","title":"DJI Air 2S Rear Right Arm Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific rear right arm module forms the corresponding aircraft arm assembly and carries the motor and attached hardware visible in the photographs. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Rear Right Arm Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eRear Right Arm Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558867554481,"sku":"part-Air-00111","price":28.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-rear-arm-module-right-01.webp?v=1788507326"},{"product_id":"genuine-oem-pulled-dji-mavic-air-2s-front-and-upper-vision-sensor-module","title":"DJI Air 2S Forward and Upper Vision System Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis forward and upper vision system module provides the model-specific sensor assembly used by the DJI Air 2S for the corresponding vision and positioning direction. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Forward and Upper Vision System Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eForward and Upper Vision System Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003evision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558867587249,"sku":"part-Air-00112","price":82.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-dji-mavic-air-2s-front-and-upper-vision-sensor-module-01.webp?v=1788507326"},{"product_id":"genuine-oem-pulled-dji-mavic-air-2s-rear-arm-module-left","title":"DJI Air 2S Rear Left Arm Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific rear left arm module forms the corresponding aircraft arm assembly and carries the motor and attached hardware visible in the photographs. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Rear Left Arm Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eRear Left Arm Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558867882161,"sku":"part-Air-00113","price":74.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-dji-mavic-air-2s-rear-arm-module-left-01.webp?v=1788507325"},{"product_id":"genuine-oem-pulled-mavic-air-2s-front-arm-module-left","title":"DJI Air 2S Front Left Arm Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific front left arm module forms the corresponding aircraft arm assembly and carries the motor and attached hardware visible in the photographs. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Left Arm Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Left Arm Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558868865201,"sku":"part-Air-00115","price":49.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-front-arm-module-left-01.webp?v=1788507325"},{"product_id":"genuine-oem-pulled-mavic-air-2s-front-arm-module-right","title":"DJI Air 2S Front Right Arm Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific front right arm module forms the corresponding aircraft arm assembly and carries the motor and attached hardware visible in the photographs. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Right Arm Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Right Arm Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, motor type, shell profile, antenna or light cable routing, connector and mounting geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558868897969,"sku":"part-Air-00116","price":47.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-front-arm-module-right-01.webp?v=1788507325"},{"product_id":"genuine-oem-pulled-mavic-air-2s-front-cover-module","title":"DJI Mavic Air 2S Aircraft Front Cover Module - OEM-pulled","description":"\u003cp\u003e\u003cstrong\u003eProduct summary:\u003c\/strong\u003e The DJI Mavic Air 2S Aircraft Front Cover Module is a protective shell made from high-grade plastic. It features integrated mounts and openings for front-facing sensors and ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e This is an OEM-pulled DJI part sourced from an original DJI unit, not an aftermarket replacement. Reboot Hub checks visible condition, connector fit, and model-specific compatibility before listing it as a repair component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty and shipping:\u003c\/strong\u003e Covered by Reboot Hub's 180-day limited parts warranty for DOA or verified defects. Ships from Hong Kong with international shipping available.\u003c\/p\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558869389489,"sku":"part-Air-00124","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/DJI_Mavic_Air_2S_Aircraft_Front_Cover_Module.webp?v=1767442205"},{"product_id":"genuine-oem-pulled-mavic-air-2s-gps-board-flexible-flat-cable","title":"DJI Air 2S GPS Flexible Flat Cable - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gps flexible flat cable carries signals or power along the exact internal routing shown for the DJI Air 2S. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both connector ends, contact direction, conductor width, cable length, fold pattern, branch layout and original routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One GPS Flexible Flat Cable in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGPS Flexible Flat Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003ecable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both connector ends, contact direction, conductor width, cable length, fold pattern, branch layout and original routing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003ePower the aircraft off, remove the flight battery, release connector locks with non-metal tools, and avoid sharp folds or pulling on exposed contacts. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558871716017,"sku":"part-Air-00155","price":12.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-gps-board-flexible-flat-cable-01.webp?v=1788507325"},{"product_id":"genuine-oem-pulled-dji-mavic-air-2s-ads-b-antenna-left-right","title":"DJI Mavic Air 2S ADS-B Antenna (Left \u0026 Right) - OEM-pulled","description":"\u003cp\u003e\u003cstrong\u003eProduct summary:\u003c\/strong\u003e DJI Mavic Air 2S ADS-B Antenna (Left \u0026amp; Right) - OEM-pulled from Reboot Hub. This is a set of left and right ADS-B antennas designed for the DJI Mavic Air 2S drone. The antennas are compact and integrated into the drone's structure for reliable air traffic signal detection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e This is an OEM-pulled DJI part sourced from an original DJI unit, not an aftermarket replacement. Reboot Hub checks visible condition, connector fit, and model-specific compatibility before listing it as a repair component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty and shipping:\u003c\/strong\u003e Covered by Reboot Hub's 180-day limited parts warranty for DOA or verified defects. Ships from Hong Kong with international shipping available.\u003c\/p\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558873780401,"sku":"part-Air-00177","price":17.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/DJI_Mavic_Air_2S_ADS-B_Antenna_Left_Right.webp?v=1767442884"},{"product_id":"genuine-oem-pulled-mavic-air-2s-downward-vision-module","title":"DJI Air 2S Downward Vision System Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis downward vision system module provides the model-specific sensor assembly used by the DJI Air 2S for the corresponding vision and positioning direction. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Downward Vision System Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eDownward Vision System Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003evision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558873813169,"sku":"part-Air-00178","price":21.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-downward-vision-module-01.webp?v=1788507391"},{"product_id":"genuine-oem-pulled-mavic-air-2s-aircraft-core-board-heat-sink","title":"DJI Air 2S Motherboard Heat Sink - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis motherboard heat sink manages airflow or heat transfer around the corresponding DJI Air 2S electronics assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Motherboard Heat Sink in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eMotherboard Heat Sink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003ecooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":46558874009777,"sku":"part-Air-00182","price":37.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-aircraft-core-board-heat-sink-01.webp?v=1788507312"},{"product_id":"air-2s-bottom-case","title":"DJI Air 2S Aircraft Lower Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis aircraft lower cover forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Aircraft Lower Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eAircraft Lower Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47633583177905,"sku":"A2S-0805","price":62.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-dji-mavic-air-2s-aircraft-lower-cover-module-01.webp?v=1788507312"},{"product_id":"air-2s-lens-hood","title":"DJI Air 2S Camera Lens Hood - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis camera lens hood fits the corresponding camera or gimbal optical area of the DJI Air 2S. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Camera Lens Hood in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eCamera Lens Hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eoptical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47633607131313,"sku":"A2S-1669","price":3.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-air-2s-lens-hood-01.webp?v=1788507365"},{"product_id":"air-2s-front-obstacle-avoidance-frame","title":"DJI Air 2S Forward Vision System Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis forward vision system cover forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Forward Vision System Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eForward Vision System Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47634755092657,"sku":"A2S-0044","price":14.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air-2s-front-obstacle-avoidance-frame-hero-hd.webp?v=1789087143"},{"product_id":"genuine-oem-pulled-dji-mavic-air-2s-lower-cover-auxiliary-bottom-light","title":"DJI Air 2S Lower Cover Auxiliary Light - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis lower cover auxiliary light forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Lower Cover Auxiliary Light in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eLower Cover Auxiliary Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676298526897,"sku":"A2S-0042","price":23.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/genuine-oem-pulled-dji-mavic-air-2s-lower-cover-auxiliary-bottom-light-hero-hd.webp?v=1789085923"},{"product_id":"genuine-oem-pulled-mavic-air-2s-complete-gimbal-assembly","title":"DJI Air 2S Complete Gimbal Arm Assembly Module without Camera Core - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis complete gimbal arm assembly module without camera core belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Complete Gimbal Arm Assembly Module without Camera Core in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eComplete Gimbal Arm Assembly Module without Camera Core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676307472561,"sku":"A2S-1674","price":304.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-complete-gimbal-assembly-01.webp?v=1788507365"},{"product_id":"genuine-oem-pulled-mavic-air-2s-cooling-fan","title":"DJI Air 2S Cooling Fan - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis cooling fan manages airflow or heat transfer around the corresponding DJI Air 2S electronics assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare fan housing size, blade and vent orientation, connector type, wire length, mounting points and airflow direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Cooling Fan in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eCooling Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003ecooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare fan housing size, blade and vent orientation, connector type, wire length, mounting points and airflow direction.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676308160689,"sku":"A2S-0781","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/genuine-oem-pulled-mavic-air-2s-cooling-fan-hero-hd.webp?v=1789093741"},{"product_id":"genuine-oem-pulled-mavic-air-2s-gimbal-lens-frame-glass","title":"DJI Air 2S Gimbal Lens Frame with Pitch Motor - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal lens frame with pitch motor fits the corresponding camera or gimbal optical area of the DJI Air 2S. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Lens Frame with Pitch Motor in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Lens Frame with Pitch Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676308390065,"sku":"A2S-1664","price":46.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-gimbal-lens-frame-glass-01.webp?v=1788507351"},{"product_id":"genuine-oem-pulled-mavic-air-2s-gimbal-rubber-dampers","title":"DJI Air 2S Gimbal Rubber Damper - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal rubber damper belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Rubber Damper in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Rubber Damper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676308553905,"sku":"A2S-0066","price":4.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/genuine-oem-pulled-mavic-air-2s-gimbal-rubber-dampers-hero-hd.webp?v=1789090058"},{"product_id":"genuine-oem-pulled-mavic-air-2s-gimbal-signal-flex-cable","title":"DJI Air 2S Gimbal Flexible Flat Cable - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal flexible flat cable carries signals or power along the exact internal routing shown for the DJI Air 2S. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both connector ends, contact direction, conductor width, cable length, fold pattern, branch layout and original routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Flexible Flat Cable in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Flexible Flat Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003ecable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both connector ends, contact direction, conductor width, cable length, fold pattern, branch layout and original routing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003ePower the aircraft off, remove the flight battery, release connector locks with non-metal tools, and avoid sharp folds or pulling on exposed contacts. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676308750513,"sku":"A2S-1665","price":6.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-gimbal-signal-flex-cable-01.webp?v=1788507351"},{"product_id":"genuine-oem-pulled-mavic-air-2s-gimbal-yaw-roll-arm-assembly","title":"DJI Air 2S Gimbal Arm Assembly without Pitch Motor or Camera Core - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal arm assembly without pitch motor or camera core belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Arm Assembly without Pitch Motor or Camera Core in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Arm Assembly without Pitch Motor or Camera Core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676309012657,"sku":"A2S-1663","price":121.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-gimbal-yaw-roll-arm-assembly-01.webp?v=1788507338"},{"product_id":"genuine-oem-pulled-mavic-air-2s-middle-frame","title":"DJI Air 2S Aircraft Middle Frame without Filter or Dust Plug - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis aircraft middle frame without filter or dust plug forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Aircraft Middle Frame without Filter or Dust Plug in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eAircraft Middle Frame without Filter or Dust Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676309078193,"sku":"A2S-0786","price":35.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-middle-frame-01.webp?v=1788507312"},{"product_id":"genuine-oem-pulled-mavic-air-2s-pitch-axis-cover","title":"DJI Air 2S Gimbal Pitch Axis Cover Plate - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal pitch axis cover plate belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Pitch Axis Cover Plate in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Pitch Axis Cover Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676309438641,"sku":"A2S-1670","price":12.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-pitch-axis-cover-01.webp?v=1788507365"},{"product_id":"genuine-oem-pulled-mavic-air-2s-roll-axis-cover","title":"DJI Air 2S Gimbal Roll Axis Inner Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal roll axis inner cover belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Roll Axis Inner Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Roll Axis Inner Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676309471409,"sku":"A2S-1671","price":6.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-genuine-oem-pulled-mavic-air-2s-roll-axis-cover-01.webp?v=1788507365"},{"product_id":"genuine-oem-pulled-mavic-air-2s-front-landing-gear","title":"DJI Air 2S Front Left Landing Gear - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis front left landing gear forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Left Landing Gear in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Left Landing Gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47676309995697,"sku":"A2S-0023-L","price":26.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/genuine-oem-pulled-mavic-air-2s-front-landing-gear-hero-hd.webp?v=1789084851"},{"product_id":"dji-air-2s-gimbal-ptz-signal-flexible-flat-cable-oem-pulled","title":"DJI Air 2S Gimbal PTZ Signal Flexible Flat Cable - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal ptz signal flexible flat cable carries signals or power along the exact internal routing shown for the DJI Air 2S. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both connector ends, contact direction, conductor width, cable length, fold pattern, branch layout and original routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal PTZ Signal Flexible Flat Cable in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal PTZ Signal Flexible Flat Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003ecable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both connector ends, contact direction, conductor width, cable length, fold pattern, branch layout and original routing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003ePower the aircraft off, remove the flight battery, release connector locks with non-metal tools, and avoid sharp folds or pulling on exposed contacts. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895187390641,"sku":"A2S-0018","price":27.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-ptz-signal-flexible-flat-cable-01.webp?v=1788507171"},{"product_id":"dji-air-2s-front-right-landing-gear-oem-pulled","title":"DJI Air 2S Front Right Landing Gear - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis front right landing gear forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Right Landing Gear in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Right Landing Gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895187554481,"sku":"A2S-0023-R","price":26.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-front-right-landing-gear-01.webp?v=1788507197"},{"product_id":"dji-air-2s-front-left-arm-axis-oem-pulled","title":"DJI Air 2S Front Left Arm Axis - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific front left arm axis forms the folding hinge connection between the corresponding arm and aircraft frame. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Left Arm Axis in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Left Arm Axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003emechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895187751089,"sku":"A2S-0031-L","price":26.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/dji-air-2s-front-left-arm-axis-restored.webp?v=1789061806"},{"product_id":"dji-air-2s-front-right-arm-axis-oem-pulled","title":"DJI Air 2S Front Right Arm Axis - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific front right arm axis forms the folding hinge connection between the corresponding arm and aircraft frame. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Right Arm Axis in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Right Arm Axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003emechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895187783857,"sku":"A2S-0031-R","price":26.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/dji-air-2s-front-right-arm-axis-restored.webp?v=1789063274"},{"product_id":"dji-air-2s-rear-left-arm-axis-oem-pulled","title":"DJI Air 2S Rear Left Arm Axis - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific rear left arm axis forms the folding hinge connection between the corresponding arm and aircraft frame. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Rear Left Arm Axis in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eRear Left Arm Axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003emechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895187914929,"sku":"A2S-0034-L","price":26.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-rear-left-arm-axis-01-left.webp?v=1788507210"},{"product_id":"dji-air-2s-rear-right-arm-axis-oem-pulled","title":"DJI Air 2S Rear Right Arm Axis - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis side-specific rear right arm axis forms the folding hinge connection between the corresponding arm and aircraft frame. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Confirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Rear Right Arm Axis in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eRear Right Arm Axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003emechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eConfirm front or rear position, left or right side, shaft length, base outline, screw-hole pattern and installed orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895187947697,"sku":"A2S-0034-R","price":26.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-rear-right-arm-axis-01-right.webp?v=1788507210"},{"product_id":"dji-air-2s-front-left-arm-hinge-cover-oem-pulled","title":"DJI Air 2S Front Left Arm Hinge Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis front left arm hinge cover forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Left Arm Hinge Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Left Arm Hinge Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895188111537,"sku":"A2S-0039-L","price":9.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-front-left-arm-hinge-cover-01.webp?v=1788507223"},{"product_id":"dji-air-2s-front-right-arm-hinge-cover-oem-pulled","title":"DJI Air 2S Front Right Arm Hinge Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis front right arm hinge cover forms or protects the stated physical location on the DJI Air 2S aircraft or gimbal assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Front Right Arm Hinge Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eFront Right Arm Hinge Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare exact aircraft location, side, outer profile, openings, clips, screw posts, mounting points, finish and visibly attached pieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895188144305,"sku":"A2S-0039-R","price":9.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-front-right-arm-hinge-cover-01.webp?v=1788507223"},{"product_id":"dji-air-2s-motherboard-heat-sink-with-cooling-fan-oem-pulled","title":"DJI Air 2S Motherboard Heat Sink with Cooling Fan - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis motherboard heat sink with cooling fan manages airflow or heat transfer around the corresponding DJI Air 2S electronics assembly. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Motherboard Heat Sink with Cooling Fan in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eMotherboard Heat Sink with Cooling Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003ecooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895193780401,"sku":"A2S-0783","price":140.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-motherboard-heat-sink-with-cooling-fan-01.webp?v=1788507312"},{"product_id":"dji-air-2s-esc-board-oem-pulled","title":"DJI Air 2S ESC Board - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis ESC board controls and distributes electrical power to the propulsion system of the DJI Air 2S through the board layout and connectors shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One ESC Board in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eESC Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197122737,"sku":"A2S-1658","price":51.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-esc-board-01.webp?v=1788507325"},{"product_id":"dji-air-2s-gimbal-upper-bracket-oem-pulled","title":"DJI Air 2S Gimbal Upper Bracket - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal upper bracket belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Upper Bracket in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Upper Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197155505,"sku":"A2S-1660","price":15.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-upper-bracket-01.webp?v=1788507339"},{"product_id":"dji-air-2s-gimbal-lower-bracket-oem-pulled","title":"DJI Air 2S Gimbal Lower Bracket - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal lower bracket belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Lower Bracket in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Lower Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197188273,"sku":"A2S-1661","price":19.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-lower-bracket-01.webp?v=1788507338"},{"product_id":"dji-air-2s-gimbal-upper-bracket-with-roll-motor-oem-pulled","title":"DJI Air 2S Gimbal Upper Bracket with Roll Motor - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal upper bracket with roll motor belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Upper Bracket with Roll Motor in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Upper Bracket with Roll Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197221041,"sku":"A2S-1662","price":85.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-upper-bracket-with-roll-motor-01.webp?v=1788507338"},{"product_id":"dji-air-2s-gimbal-bearing-oem-pulled","title":"DJI Air 2S Gimbal Bearing - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal bearing belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Bearing in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003emechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197253809,"sku":"A2S-1667","price":3.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-bearing-01.webp?v=1788507351"},{"product_id":"dji-air-2s-gimbal-roll-axis-rear-cover-oem-pulled","title":"DJI Air 2S Gimbal Roll Axis Rear Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal roll axis rear cover belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Roll Axis Rear Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Roll Axis Rear Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197384881,"sku":"A2S-1672","price":9.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-roll-axis-rear-cover-01.webp?v=1788507365"},{"product_id":"dji-air-2s-gimbal-lens-frame-with-rear-cover-oem-pulled","title":"DJI Air 2S Gimbal Lens Frame with Rear Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal lens frame with rear cover fits the corresponding camera or gimbal optical area of the DJI Air 2S. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Lens Frame with Rear Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Lens Frame with Rear Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197417649,"sku":"A2S-1673","price":18.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-lens-frame-with-rear-cover-01.webp?v=1788507365"},{"product_id":"dji-air-2s-gimbal-yaw-motor-with-bracket-oem-pulled","title":"DJI Air 2S Gimbal Yaw Motor with Bracket - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal yaw motor with bracket belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Yaw Motor with Bracket in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Yaw Motor with Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003egimbal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197450417,"sku":"A2S-1675","price":60.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-yaw-motor-with-bracket-01.webp?v=1788507365"},{"product_id":"dji-air-2s-camera-lens-core-oem-pulled","title":"DJI Air 2S Camera Lens Core - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis camera lens core is the internal optical module shown for the DJI Air 2S gimbal camera and is intended for exact-part repair. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Camera Lens Core in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eCamera Lens Core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eoptical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare diameter, optical opening, frame profile, tabs, screw points, surface finish and the exact camera generation shown.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eProtect the optical surfaces and flexible cables, do not force an axis or bearing, and complete model-specific gimbal calibration after controlled reassembly. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197483185,"sku":"A2S-1676","price":139.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-camera-lens-core-01.webp?v=1788507365"},{"product_id":"dji-air-2s-gimbal-camera-rear-cover-oem-pulled","title":"DJI Air 2S Gimbal Camera Rear Cover - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis gimbal camera rear cover belongs to the model-specific camera stabilization assembly of the DJI Air 2S and performs the physical support, movement or protection role shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Gimbal Camera Rear Cover in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eGimbal Camera Rear Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eairframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare the named gimbal axis or bracket, motor inclusion, arm geometry, bearings, stops, connector layout, covers and attached flexible flat cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse the correct tools and model-specific disassembly sequence. Confirm every clip, screw post, side and mounting surface before tightening or closing the aircraft. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197515953,"sku":"A2S-1677","price":12.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-gimbal-camera-rear-cover-01.webp?v=1788507378"},{"product_id":"dji-air-2s-rear-vision-system-module-oem-pulled","title":"DJI Air 2S Rear Vision System Module - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis rear vision system module provides the model-specific sensor assembly used by the DJI Air 2S for the corresponding vision and positioning direction. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Rear Vision System Module in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eRear Vision System Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003evision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare sensor direction, lens count, bracket shape, connector position, mounting points and the complete module orientation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197548721,"sku":"A2S-1679","price":16.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-rear-vision-system-module-01.webp?v=1788507378"},{"product_id":"dji-air-2s-motherboard-oem-pulled","title":"DJI Air 2S Motherboard - OEM-pulled","description":"\u003cdiv class=\"rh-spare-part-description\"\u003e\n\u003ch2\u003eWhat this part is for\u003c\/h2\u003e\n\u003cp\u003eThis motherboard is the central electronics assembly for the DJI Air 2S and connects multiple internal aircraft systems through the ports and circuitry shown. It is an OEM-pulled component intended for model-specific repair after the failed, damaged or missing part has been correctly identified. Similar-looking DJI parts can use different connectors, molded profiles, dimensions, side geometry or hardware revisions, so the listing photographs are part of the product specification rather than decoration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and fit checks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Air 2S. This listing is not for DJI Mavic Air 2, DJI Air 3, DJI Air 3S or another DJI aircraft unless a separate product page explicitly states compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary identification check:\u003c\/strong\u003e Compare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond identification check:\u003c\/strong\u003e Compare every visible connector, mounting point, side, axis, marking, finish and attached piece with the component removed from the aircraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair diagnosis:\u003c\/strong\u003e Confirm the failed part before ordering. Similar symptoms can involve a connected cable, board, sensor, motor, structural component, firmware state or calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCondition and package contents\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM-pulled DJI component removed from original equipment; it is not sold as factory-new. Normal cosmetic marks from removal, handling or prior installation may be present. Review each image at full size because the visible condition, exact revision, connector layout and attached hardware define the configuration offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One Motherboard in the photographed configuration. Multiple images can show the same component from different angles. Screws, adhesive, gaskets, cables, covers, tools, paired-side parts and unrelated assemblies are included only when they are clearly visible and expressly named on this page.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible model\u003c\/th\u003e\n\u003ctd\u003eDJI Air 2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eMotherboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart category\u003c\/th\u003e\n\u003ctd\u003eboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eOEM-pulled; inspect the exact listing photos for cosmetic condition and included pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrdering reference\u003c\/th\u003e\n\u003ctd\u003eCompare both PCB sides, printed identifiers, connector count and orientation, shielding, heat-sink contact points, mounting holes and component layout.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eUse ESD-safe handling with the aircraft battery removed. Inspect every connector before seating the board or module, and complete any required firmware service or calibration after installation. Professional installation is recommended when the repair involves diagnosis, soldering, internal electronics, optical alignment, firmware service or calibration. Stop if the replacement does not seat without force or if any connector, mounting point, side or printed revision differs from the original.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDo not order from the title alone. Compare every product photograph with the removed component and confirm the exact aircraft generation, physical position and hardware layout. If one detail does not match, contact Reboot Hub with clear photographs of the original part before purchase. Warranty eligibility, exclusions and return conditions follow the written terms shown on the product page.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":47895197679793,"sku":"A2S-1708","price":287.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/files\/air2-air2s-spare-parts-20260904-dji-air-2s-motherboard-01.webp?v=1788507418"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7511\/6721\/collections\/dji-air-2s-parts.webp?v=1788508717","url":"https:\/\/reboot-hub.com\/collections\/dji-air-2s-parts.oembed?page=3","provider":"Reboot Hub","version":"1.0","type":"link"}