DJI GL358wD Wiki | Phantom 3 SE Controller

Quick Answer

The DJI declaration pairs GL358wD with Phantom 3 SE. Verify the label, firmware and lawful regional band; the 4 km FCC test is not a CE or 2.4 GHz rating.

Specifications

Model identityGL358wD paired with Phantom 3 SE W328 in DJI declaration Annex 1

Documented aircraftPhantom 3 SE; no Phantom 3 4K GL358wB substitution claim

Operating frequencies2.400–2.483 GHz and 5.725–5.850 GHz; regional limits apply

2.4 GHz DJI range test1,000 m FCC / 500 m SRRC / 500 m CE, unobstructed and free of interference

5.8 GHz DJI range test4,000 m FCC / 3,000 m SRRC / 400 m CE, unobstructed and free of interference

Controller battery2,600 mAh rechargeable battery; not the aircraft flight battery

ChargingMicro USB; approximately 2.5 hours at 1.5 A in DJI manual

Operating temperature0 to 40 °C

Mobile device holderSmartphone or tablet; DJI GO joins PHANTOM3SE Wi-Fi video network

Model identity sourcehttps://d15bfve0bne4ko.cloudfront.net/Phantom/P3SE_W328%2BGL358wD.pdf

Controller specification sourcehttps://dl.djicdn.com/downloads/phantom_3_se/Phantom_3_SE_User_Manual_v1.0_en.pdf

Compatibility Notes

The DJI declaration pairs GL358wD with Phantom 3 SE. Verify the label, firmware and lawful regional band; the 4 km FCC test is not a CE or 2.4 GHz rating.

DJI Phantom 3 SE

Inspection Checklist

Model identity

Read the exact printed controller model code and match the aircraft generation before pairing.

Controls and ports

Check stick centering, mode switch, gimbal dial, physical output ports and mobile/display path.

Battery and radio

Check charging, antenna integrity and a safe short-range link with compatible current firmware.

Common Failure Modes

Wrong controller generation

Similar housing does not prove compatibility; compare the model code and DJI transmission generation.

Control or display fault

Damaged sticks, output ports, display, antenna, battery or stale firmware can interrupt the link.

Repair Notes

Confirm exact aircraft/controller labels and firmware before diagnosis.
Retest stick calibration, output path and a controlled short-range link after any repair.

Pre-Owned Buying Checks

Verify the printed model code and correct aircraft generation.
Inspect sticks, outputs, display/phone mount, antennas, battery and charging.
Confirm pairing and no current stock claim from the Wiki profile alone.